Cylinder Head, 998CC, 'A' Plus 1980 on
Mini Catalog Page 2-25
No. Part No. Description Qty Remarks
1 CAM6517  Cylinder head 1 L.C.  
1 CAM6812  Cylinder head - use TAM2168 1 H.C. Triple collet groove  
1 TAM2168  Cylinder head 1 Lead free  
2 CHS2515  Stud, water elbow 3  
3 51K885  Stud, rocker cover long 2  
4 CHS522 Stud, rockers short 2  
5 53K487  Stud, manifold 6  
6 53K402  Stud, heater tap valve take-off 2  
7 12G1111  Valve guide, was 2A608 8 12G1963 alternative  
8 RU612123  Oil hole plug 1  
9 2A180  Blanking plate, heater take-off 1 If required  
10 88G221  Gasket 1  
11 GHF200  Nut 2  
12 LWZ304  Washer for nut 2  
13 AEA762  Valve insert inlet 4  
13 TAM2152  Valve insert inlet 4 Lead free  
13 AEA763  Valve insert exhaust, was 2A640 4 Use TAM2068  
13 TAM2068  Valve insert exhaust 4 Lead free  
14 TAM1062  Inlet valve H.C. and lead free 4 Triple collet groove  
14 TAM1770  Exhaust valve H.C. and lead free 4 Triple collet groove  
14 CAM6502  Inlet valve, collett groove put up .140 thou from valve tip 4 Use 12G1015 spring  
14 CAM6503  Exhaust valve collett grve put up .140 thou from valve tip 4 Use 12G1015 spring  
14 CAM6505  Exhaust valve collett grve put up .140 thou from valve tip 4 Lead free, chrome stem  
14 CAM6391  Inlet valve, top of collett groove .220 thou from valve tip 4 Use AEA311 spring  
14 12A1987  Exh valve, top of collett groove .220 thou from valve tip 4 Use AEA311 spring  
15 12G1015  Valve spring for all triple collett valves 8 Plus CAM6502/3/5  
15 AEA311  Valve spring 8 For 12A1987/CAM6391  
16 88G617  Top cap, single groove 8  
16 AHU1897  Top cap, triple groove 8  
17 ADU4905  Valve oil seal 8  
18 88G459  Cotter 8 prs Single groove valve  
18 CAM6975  Cotter 8 prs Triple groove valve  
19 12A1950  Rocker shaft 1  
20 12G1926  Rocker shaft post with oil feed hole 3  
21 12G1927  Rocker shaft post tapped 1  
22 2A515  Rocker shaft post locking plate 1 NLA use 2A259  
23 2A258  Locating plate plug 1  
24 6K556  Rocker spacer spring 3  
25 CAM289  Rocker sintered 8  
26 12G1221  Rocker forged 8 Alternative in sets  
27 2A21  Rocker bush 8 Not fitted to CAM289  
28 AEG167  Adjusting screw 8  
29 NT605061  Adjusting nut 8  
30 51K1193  Cylinder head nut, until CAM4545 9  
31 GHF302  Washer, until CAM4545 fitted 9  
32 CAM4545  Head nut with built in washer 9  
33 GUG2506HG  Cylinder head gasket, was TAM2121B and AJM302 1