| No. |
Part No. |
Description |
Qty |
Remarks |
| 1 |
AEG624 |
Connecting rod, 5.75" centers |
4 |
1071cc, 1275cc |
| 1 |
AEG309 |
Connecting rod, 5.875" centers |
4 |
970cc only |
| 2 |
AEG519 |
Connecting rod bolt (Hi-specification bolt use BE6001+)
|
8 |
|
| 3 |
AEG147 |
Connecting rod nut (Alternative non nyloc EAC5541A)
|
8 |
|
| 4 |
C-AEG329 |
Crankshaft (Steel billet EN40B)(AEG330 casting) |
1 |
970cc |
| 4 |
C-AEG170 |
Crankshaft (Steel billet EN40B)(AEG171 casting) |
1 |
1071cc |
| 4 |
C-AEG479 |
Crankshaft (Forging crossdrilled EN40B)(AEG480 casting)
|
1 |
1275cc |
| 5 |
6K836 |
Crankshaft keyway |
1 |
|
| 6 |
VP572 |
Connecting rod bearings set (8G2399) |
1 |
Oversize available |
| 7 |
VP91120 |
Main bearings set (8G2391) |
1 |
Oversize available |
| 8 |
VPW41 |
Thrust washer kit |
1 |
Available 03/15/30 oversize |
| 9 |
22G1053 |
Primary gear (24 teeth) |
1 |
|
| 10 |
DAM8889 |
Front bush, was 22G770 |
1 |
|
| 11 |
22G109 |
Rear bush |
1 |
|
| 12 |
DAM6490 |
Primary gear shim 2.84-2.89mm (.112-114") |
1 |
These shims are used to give the correct end float
of 3-6 thou on the primary gear check 22A319 and 88G459 for wear.
|
| 12 |
DAM6486 |
Primary gear shim 2.89-2.94mm (.114-116") |
1 |
|
| 12 |
DAM6487 |
Primary gear shim 2.94-2.99mm (.116-118") |
1 |
|
| 12 |
DAM6488 |
Primary gear shim 2.99-3.04mm (.118-120") |
1 |
|
| 12 |
DAM6489 |
Primary gear shim 3.04-3.09mm (.120-122") |
1 |
|
| 13 |
22A319 |
Thrust washer U clip |
1 |
|
| 14 |
88G549 |
Backing ring |
1 |
|
| 15 |
AEG148 |
Camshaft |
1 |
|
| 15 |
AEG510 |
Camshaft |
1 |
1275 only, 9FSAY 40006 on |
| 16 |
AHU2379 |
Camshaft locating plate |
1 |
|
| 17 |
GHF117 |
Locating plate screw |
1 |
|
| 18 |
GHF321 |
Shakeproof spring washer |
1 |
|
