| No. |
Part No. |
Description |
Qty |
Remarks |
| 1 |
AEG624 |
Connecting rod |
4 |
1071cc and 1275 |
| 2 |
AEG519 |
Con rod bolt |
8 |
|
| 2 |
BE6001 |
Con rod bolt set, ARP Comp grade |
1 |
|
| 3 |
AEG147 |
Con rod bolt nut (EAC5541A non nyloc alternative) |
8 |
|
| 4 |
C-AEG329 |
Crankshaft, steel billet EN40B |
1 |
970cc |
| 4 |
C-AEG170 |
Crankshaft, steel billet EN40B |
1 |
1071 |
| 4 |
C-AEG479 |
Crankshaft (AEG480 casting) |
1 |
1275 S (Nitrided only) |
| 4 |
12G1287 |
Crankshaft (fitted solid wall block, 1300 mains size)
|
1 |
12G type 1.625" journal |
| 5 |
6K836 |
Crankshaft keyway |
1 |
|
| 6 |
VP572 |
Con rod bearing set (8G2399) |
1 |
Also in 10/20/30/40 oversize |
| 7 |
VP91120 |
Main bearings set (8G2301) |
1 |
Also in 10/20/30/40 oversize |
| 8 |
VPW41 |
Thrust washer kit (BHM1293) |
1 |
Also in 03/30 thou oversize |
| 9 |
22G1053 |
Primary gear (24 teeth) |
1 |
|
| 10 |
DAM8889 |
Front bush was 22G770 |
1 |
|
| 11 |
22G109 |
Rear bush |
1 |
|
| 12 |
DAM6490 |
Primary gear shim 2.84-2.89mm (.112-114") |
1 |
These shims are used to give the correct end float
of 3-6 thou on the primary gear check 22A319 and 88G459 for wear.
|
| 12 |
DAM6486 |
Primary gear shim 2.89-2.94mm (.114-116") |
1 |
|
| 12 |
DAM6487 |
Primary gear shim 2.94-2.99mm (.116-118") |
1 |
|
| 12 |
DAM6488 |
Primary gear shim 2.99-3.04mm (.118-120") |
1 |
|
| 12 |
DAM6489 |
Primary gear shim 3.04-3.09mm (.120-122") |
1 |
|
| 13 |
22A319 |
Thrust washer U clip |
1 |
|
| 14 |
88G549 |
Backing ring |
1 |
|
| 15 |
AEG148 |
Camshaft |
1 |
|
| 15 |
AEG510 |
Camshaft |
1 |
1275 only, 9FSA 40006 on |
| 16 |
WKN505 |
Keyway |
1 |
|
| 17 |
CHM108 |
Oil pump driving flange |
1 |
|
| 18 |
AHU2379 |
Camshaft locating plate |
1 |
|
| 19 |
GHF117 |
Bolt for locating plate |
3 |
|
| 20 |
GHF321 |
Shakeproof washer for locating plate |
3 |
|
| 21 |
AEA696 |
Camshaft gear cast iron |
1 |
Gears and chains available as C-AJJ3323 Duplex kit
in cast iron. Or C-AJJ3325 in lightened steel. |
| 22 |
AEA695 |
Crankshaft gear cast iron |
1 |
|
| 23 |
6K629 |
Camshaft nut |
1 |
|
| 24 |
2A759 |
Locktab |
1 |
|
| 25 |
2H4905 |
Chain |
1 |
|
| 26 |
6K628 |
Washer to shim crank gear |
A/R |
|
| 27 |
12G619 |
Front plate gasket |
1 |
|
| 28 |
AEG161 |
Front plate |
1 |
NLA |
| 29 |
SH605051 |
Screw plate to block |
2 |
|
| 30 |
GHF321 |
Washer was LWZ305 |
2 |
Alt GHF332 |
| 31 |
AEA687 |
Screw, front plate to maincap |
2 |
|
| 32 |
AEG314 |
Push rod |
8 |
|
| 33 |
AEG584 |
Cam follower with oil hole |
8 |
|
| 34 |
12G4499 |
Distributor spindle |
1 |
|
| 35 |
13H2792 |
Distributor housing oil seal |
1 |
|
| 36 |
12A1136 |
Distributor housing |
1 |
CWE |
