| No. |
Part No. |
Description |
Qty |
Remarks |
| 0 |
|
Use 6/16 pinion on 12" wheels with 3.44 final drive. |
|
|
| 1 |
22A1881 |
Speedo pinion 17 teeth |
1 |
All pre 1980 |
| 1 |
DAM2905 |
Speedo pinion 16 teeth, 3.1 final drive (from 1984 on) |
1 |
12" wheels |
| 1 |
TXD10006 |
Speedo pinion 18 teeth, 3.2 final drive |
1 |
12A Engine TBI |
| 1 |
TXD10004 |
Speedo pinion 15 teeth, 2.76 final drive |
1 |
|
| 2 |
2A3624 |
Metal seating bush |
1 |
|
| 3 |
DAM8488 |
Speedometer cable to pinion housing |
4 |
Was 28G251 |
| 4 |
GUG705565GM |
Gasket |
1 |
|
| 5 |
22A862 |
U clip |
1 |
|
| 6 |
2A3720 |
Speedo drive spindle for 22A1881, 6 teeth |
1 |
|
| 6 |
DAM6028 |
Speedo drive spindle for DAM2905, 7 teeth, blue code |
1 |
12" wheels, 3.1 f/drive |
| 6 |
TXF10004 |
Speedo drive spindle for TXD10006, 5 teeth, red code |
1 |
3.2 final drive |
| 6 |
TXF10001 |
Speedo drive spindle for TXD10004 |
1 |
|
| 7 |
22G1845 |
Bell crank pivot pin |
1 |
|
| 8 |
31B447 |
Pivot pin seal |
1 |
|
| 9 |
42H1077 |
Pivot bush |
1 |
|
| 10 |
22G1849 |
Release lever (reverse) |
1 |
|
| 11 |
42H1081 |
Lever spacer |
2 |
|
| 12 |
22G1847 |
Bell lever crank, lower |
1 |
|
| 13 |
22G1848 |
Bell lever crank, upper |
1 |
|
| 14 |
22G1858 |
Selector shaft |
1 |
|
| 15 |
22G1844 |
Interlock spool |
1 |
|
| 16 |
22G1854 |
Selector shaft for speed fork |
1 |
|
| 17 |
TSP100390 |
1st/2nd selector fork, genuine |
1 |
DAM7425 |
| 17 |
22G1855MS |
1st/2nd selector fork |
1 |
|
| 18 |
TSP100400 |
3rd/4th selector fork, genuine |
|
DAM7426 |
| 19 |
22G2595 |
Roll pin to hold 3rd/4th fork to rod |
1 |
|
| 20 |
BLS110 |
Detent ball |
1 |
These parts sit |
| 21 |
22G2083 |
Detent spring |
1 |
behind the offset |
| 22 |
22G1870 |
Detent sleeve |
1 |
drive flange cover |
| 23 |
22G1417 |
'O' ring for sleeve |
1 |
|
| 24 |
DAM3022 |
Gaiter for rod change oil seal |
1 |
|
| 25 |
AHU1672 |
Rod change case oil seal |
1 |
not shown |
